Fandom

武装突袭 Wiki

Arma 3 Animals: Ambient System

简体 | 繁體

4,827个页面创建
于此维基上
添加新页面
评论0 分享

您使用了广告屏蔽软件!


Wikia通过广告运营为用户提供免费的服务。我们对用户通过嵌入广告屏蔽软件访问网站进行了使用调整。

如果您使用了广告屏蔽软件,将无法使用我们的服务。请您移除广告屏蔽软件,以确保页面正常加载。

Intro编辑

Animals can be placed in Arma 3 either directly by the mission designer (scripting command createAgent, animal sites in modules) or created by the Ambient System. This page is only about the Ambient System presented in Arma 3, which is not the same as the Ambient System implemented in Arma 2.

Note: Animals placed by the mission designer are global and every player in a multiplayer mission can see them. Animals created by the Ambient System are only local and every player in multiplayer mission has his own ambient animals.


System description编辑

Basic terms编辑

File:Ambient creation.png
  • Ambient animal - An animal created by the automatic Ambient System.
  • Ambient config - A config class placed in configFile >> CfgWorlds >> Name_of_map >> AmbientA3.
  • Main spawn circle - A circle with defined radius (parameter areaSpawnRadius) on which border are testing circles being created. The center is placed on a camera position. Main spawn circles are marked by green, red and blue colors on the attached image.
  • Testing circle - A circle with a defined radius. Every testing circle belongs to the main spawn circle. The center of a testing circle is placed on a border of the defined main spawn circle. Conditions for a creation of animals are tested in the center of this circle, animals are created in the area of whole circle.

System steps编辑

Creation of animals

  • 1) The system checks there are not too many animals already (if the total cost of all animals is the same or higher than the maximal cost).
    • Every animal has defined the cost parameter in the ambient config (see Config Structure).
    • Every map has defined the maxCost parameter in ambient config (see Config Structure).
    • If there are too many animals present already, all following steps are skipped.
  • 2) Main spawn circle is processed.
    • a) The system places each testing circle on the border of the main spawn circle (with a higher probability in front of the player, see attached picture).
    • b) Conditions in the center of each testing circle are checked and evaluated, the number of missing animals for the testing circle area is counted ([how many animals should be here according to conditions] - [how many animals are already here]).
    • c) One animal type for each main spawn circle is created according to the counted probability.
      • Example: 4 rabbits and 2 goats are missing, probability is 2:1 for rabbits.
      • The number of created animals is dependent on the parameter spawnCount defined for each animal in the ambient config (see Config Structure).


Removing of animals
An animal is removed if its position is out of the circle (the center is placed on the position of camera) which radius is defined by the parameter areaMaxRadius.


Config structure编辑

The ambient config is placed in configFile >> CfgWorlds >> Name_of_map >> AmbientA3.

Structure:

class AmbientA3
{
   maxCost = 500;                      //max. cost of all animals spawned by the ambient system
   
   class Main_spawn_circle_name
   {
      areaSpawnRadius = 440.0;         //radius of the main spawn circle, testing circles are placed on this radius
      areaMaxRadius = 500.0;           //radius where animals are removed
      spawnCircleRadius = 30.0;        //radius of testing circles
      spawnInterval = 4.7;             //how often is the creation process started in seconds
      
      class Species
      {
         class Animal_config_class     //class of animal from CfgVehicles
         {
            maxCircleCount = 5;        //expression - max. number of a given kind in testing circle
            maxWorldCount = 8;         //max. number of animals on map
            cost = 3;                  //cost of animal
            spawnCount = 1;            //how many animals should be spawned at once
            groupSpawnRadius = 10;     //radius for spawning of animal group
            maxAlt = 200;              //if defined, an animal can be created only if [camera height above/under water/ground] < maxAlt
            minAlt = -10;              //if defined, an animal can be created only if [camera height above/under water/ground] > minAlt
         };
      };
   };
};

In parameter maxCircleCount can be used:

  • rain [0-1] - intensity of rain
  • night [0-1] - intensity of night
  • meadow [0-1] - how much it seems here like meadow
  • trees [0-1] - how much trees is around
  • hills [0-1] - 160 m above sea level -> 0; 400 m above sea level -> 1
  • houses [0-1] - how many houses is around
  • windy [0-1] - intensity of wind
  • forest [0-1] - how much it seems here like forest
  • deadBody [0-1] - how far is corpse (1 for corpse very close)
  • sea [0-1] - how far is sea (1 for position in sea)
  • waterDepth [0-max.Depth] - depth of water in meters
  • camDepth [0-max.Depth] - depth of camera position in water in meters


Complete example for Stratis map:

class CfgWorlds
{
   class Stratis
   {
      class AmbientA3
      {
         maxCost = 500;
         
         class Radius440_500
         {
            areaSpawnRadius = 440.0;
            areaMaxRadius = 500.0;
            spawnCircleRadius = 30.0;
            spawnInterval = 4.7;
            
            class Species
            {
               class Seagull
               {
                  maxCircleCount = ((sea * (1 - night)) + (2 * houses * sea)) * (1 - night);
                  maxWorldCount = 8;
                  cost = 3;
                  spawnCount = 1;
                  groupSpawnRadius = 10;
                  maxAlt = 200;
                  minAlt = -10;
               };
               class Rabbit_F
               {
                  maxCircleCount = (20 * (0.1 - houses)) * (1 - sea);
                  maxWorldCount = 4;
                  cost = 5;
                  spawnCount = 1;
                  groupSpawnRadius = 10;
                  maxAlt = 80;
                  minAlt = -5;
               };
            };
         };
         class Radius40_60
         {
            areaSpawnRadius = 50.0;
            areaMaxRadius = 83.0;
            spawnCircleRadius = 10.0;
            spawnInterval = 1.5;
      
            class Species
            {
               class CatShark_F
               {
                  maxCircleCount = (4 * (WaterDepth interpolate [1,30,0,1]));
                  maxWorldCount = 10;
                  cost = 6;
                  spawnCount = 1;
                  groupSpawnRadius = 10;
                  maxAlt = 10;
                  minAlt = -80;
               };
               class Turtle_F
               {
                  maxCircleCount = (2 * (waterDepth interpolate [1,16,0,1]) * ((1-houses) * (1-houses)));
                  maxWorldCount = 6;
                  cost = 5;
                  spawnCount = 1;
                  groupSpawnRadius = 10;
                  maxAlt = 10;
                  minAlt = -80;
               };
            };
         };
      };
   };
};

更多维基

随机维基