Fandom

武装突袭 Wiki

CfgMoves Config Reference

简体 | 繁體

4,827个页面创建
于此维基上
添加新页面
评论0 分享

您使用了广告屏蔽软件!


Wikia通过广告运营为用户提供免费的服务。我们对用户通过嵌入广告屏蔽软件访问网站进行了使用调整。

如果您使用了广告屏蔽软件,将无法使用我们的服务。请您移除广告屏蔽软件,以确保页面正常加载。

Introduction编辑

cfgMoves is the nerve center of all skeletal character animation. The animation of human characters that is - not the simple, procedural animation of objects (e.g. raising/lowering a barrier, opening/closing of an aircraft canopy).

cfgMoves has two major sections: Actions and States.

Actions编辑

It is where the character animation state machine is set up. It's a bit confusing that BI called the animation state handler "Actions", and the actions are called "States", but this is what it is.

What this thing does, is configure all the possible animation states (e.g. standing upright with a rifle, kneeling with a pistol, parachuting), and define for each of them which animations can be played in and from that given state.

For instance, from the kneeling with a pistol state (PistolKneelActions), you cannot directly go into crawling forward on your stomach with a rifle (even if you have a rifle). First you would have to holster the pistol and grab your rifle, then lie down, or viceversa. Similarly, if you're prone (whether unarmed, or armed with a pistol or rifle), you cannot salute - first you'd have to stand up.

What animation can or cannot be played, in what situation, is set up here in Actions. Player input (key presses, clicks) are then directed to this state machine, which interprets them and decides what action/animation the avatar will perform next, according to these rules. Same rules apply to AI players.

States编辑

In this section, each animation file (RTM) has a corresponding entry. Animation properties, such as playback speed, interpolation rules, blending times, collision shapes to use during animation, etc.., are configured here.

These animations are the ones referenced in the Actions section above. While Actions represents a complex graph, States is more like a list of items, even though some rules are also set up here (see the ConnectTo[] and InterpolateTo[] properties).

cfgGestures is similar to States, it holds the bone-masked or layered animations introduced in Arma 2. Welcome to reloading-while-running.

Namespace of anim classes and files编辑

A...P...M...S...W...D[_A...P...M...S...W...D][_Comment]

A: Description of the animation type, i.e.: mov for movement, cts for cutscene

P: Stance: erc for erected, knl for kneel, pne for prone

M: Speed of animation: stp for stopped, wlk for walk, run for running, eva for evasive

S: Weapon holding: low for lowered, ras for raised

W: Weapon: non for unarmed, pst for pistol, lnr for launcher, rfl for rifle.

D: Direction of movement: non for no direction, f for forward, etc.

If there is a second movement definition named [_A...P...M...S...W...D] after the first one, the animation is a transition from the first animation to the second.

[_Comment]: additional comments, if required.

Example: AmovPpneMstpSnonWnonDnon means: Movement - Prone - Stopped - civil (no weapon) - no direction (due to being static).

Alphabetical Order编辑

A编辑

access编辑

Type
Integer
Description
See access (CfgVehicles).
access = 3;

actions编辑

Type
String
Description
Sets the action class/group to which this state belongs to.
actions = "PistolStandActionsRunR";
actions = "RifleStandActions";
actions = "InjuredManActionsnon_norot";
actions = "SitActions";

aiming编辑

Type
String
Description
This property references BlendAnims class entries to use when aiming up/down. These are sets of named selections, with weights associated to them, defining how much should the bodyparts move while aiming.

Notice how for instance aimingDefault[] sets up increasing weights for bones: Spine (0.3), Spine1 (0.4), Spine2 (0.5), Spine3/Head/Neck (0.6), shoulders and upper arms (0.8) and finally forearms, hands and weapons (1). This makes for a smooth arching of the body while aiming.

aiming = "empty";
aiming = "aimingDefault";
aiming = "aimingNo";
aiming = "aimingCivil";
aiming = "aimingLying";
aiming = "aimingPistol";
aiming = "aimingLauncher";

aimingDefault[]编辑

Type
Array
Description
BlendAnims array, see aiming above.
aimingDefault[] = {"head", 0.6, "neck1", 0.6, "neck", 0.6, "weapon", 1, "launcher", 1, "LeftShoulder", 0.8, "LeftArm", 0.8, "LeftArmRoll", 1,
    "LeftForeArm", 1, "LeftForeArmRoll", 1, "LeftHand", 1, "LeftHandRing", 1, "LeftHandPinky1", 1, "LeftHandPinky2", 1, "LeftHandPinky3", 1,
    "LeftHandRing1", 1, "LeftHandRing2", 1, "LeftHandRing3", 1, "LeftHandMiddle1", 1, "LeftHandMiddle2", 1, "LeftHandMiddle3", 1, "LeftHandIndex1", 1,
    "LeftHandIndex2", 1, "LeftHandIndex3", 1, "LeftHandThumb1", 1, "LeftHandThumb2", 1, "LeftHandThumb3", 1, "RightShoulder", 0.8, "RightArm", 0.8,
    "RightArmRoll", 1, "RightForeArm", 1, "RightForeArmRoll", 1, "RightHand", 1, "RightHandRing", 1, "RightHandPinky1", 1, "RightHandPinky2", 1,
    "RightHandPinky3", 1, "RightHandRing1", 1, "RightHandRing2", 1, "RightHandRing3", 1, "RightHandMiddle1", 1, "RightHandMiddle2", 1,
    "RightHandMiddle3", 1, "RightHandIndex1", 1, "RightHandIndex2", 1, "RightHandIndex3", 1, "RightHandThumb1", 1, "RightHandThumb2", 1,
    "RightHandThumb3", 1, "Spine", 0.3, "Spine1", 0.4, "Spine2", 0.5, "Spine3", 0.6};
aimingDefault[] = {};

aimingNo[]编辑

Type
Array
Description
BlendAnims array, see aiming above.
aimingNo[] = {};

aimPrecision编辑

Type
Float
Description
Probably goes into accuracy calculations when firing a weapon; the higher the value, the less accurate aiming becomes.

Wounded >1, firing upright animations are mostly 1, kneeling is 0.5, and prone values are even lower.

aimPrecision = 5;        //Carrying a wounded soldier on your back
aimPrecision = 2;        //Injured, cannot stand up
aimPrecision = 1;        //Standing upright
aimPrecision = 0.5;      //Crouched
aimPrecision = 0.3;      //Prone
aimPrecision = 0.15;     //Walking slowly while looking down the sights

B编辑

binocOff编辑

Type
String
Description
Found in Actions together with binocOn. They define which state is used for bringing up and putting away binoculars.
binocOff = "";
binocOff = "AmovPercMstpSrasWrflDnon";
binocOff = "AmovPknlMstpSrasWrflDnon";
binocOff = "AmovPercMstpSrasWrflDnon";
binocOff = "AmovPpneMstpSrasWrflDnon";

binocOn编辑

Type
String
binocOn = "";    //No binocs while lying on the ground injured
binocOn = "AwopPknlMstpSoptWbinDnon_rfl";
binocOn = "AwopPercMstpSoptWbinDnon_rfl";
binocOn = "AwopPknlMstpSoptWbinDnon_pst";	
binocOn = "AwopPpneMstpSoptWbinDnon_rfl";

boundingSphere编辑

Type
Float / Boolean
Description
Probably obsolescent, used for character collision detection. For more accurate collision models use collisionShape & Co. Still used in Arma 2 for cutscene animations. Sphere collision probably much cheaper than anything else.
boundingSphere = true;
boundingSphere = 1;
boundingSphere = 1.5;
boundingSphere = 8;
boundingSphere = 35;

C编辑

CanNotMove编辑

Type
String
Description
Found in Actions.
CanNotMove = "AmovPpneMstpSrasWrflDnon";

canPullTrigger编辑

Type
Boolean
Description
Self explanatory. While in that animation, the player can fire it's weapon, but his trigger finger will remain extended. The little "finger squeezing the trigger" animation won't play.
canPullTrigger = 1;

Civil编辑

Type
String
Description
Found in Actions, defines what happens to a soldier if he were to lose his weapons and become unarmed.
Civil = "AmovPercMstpSnonWnonDnon";
Civil = "AmovPercMstpSnonWnonDnon_gear";

CivilLying编辑

Type
String
Description
Found in Actions.
CivilLying = "AmovPpneMstpSnonWnonDnon";

collisionGeomCompPattern[]编辑

Type
Array
collisionGeomCompPattern[] = {1,3,6};

collisionShape编辑

Type
String
Description
Found in States. Path to the collision model to be used during the animation, a special P3D file with only a Geometry LOD in it.
collisionShape = "ca\Anims\Characters\data\Geom\Sdr\Sstanistat_safe_geom.p3d";
collisionShape = "ca\Anims\Characters\data\Geom\Sdr\geom_Adth.p3d";

collisionShapeSafe编辑

Type
String
collisionShapeSafe = "ca\Anims\Characters\data\Geom\Sdr\sbeh45l_safe_geom.p3d";

collisionVertexPattern[]编辑

Type
Array
Description
Possibly some internal requirement of the collision detection algorithm. The strings represent individual vertices (named selections in the P3D).
collisionVertexPattern[] = {"1a", "2a", "3a", "4a", "5a", "6a", "7a", "8a", "1c", "2c"};
collisionVertexPattern[] = {"1a", "2a", "3a", "4a", "5a", "6a", "7a", "8a", "9a", "10a", "11a", "12a", "13a",
    "14a", "15a", "16a", "17a", "18a", "19a", "20a", "21a", "22a", "23a", "24a", "25a", "26a", "27a", "28a",
    "29a", "30a", "31a", "32a", "33a", "34a", "1c", "2c", "3c", "4c", "5c", "6c", "7c", "8c"};

Combat编辑

Type
String
Description
Found in Actions.
Combat = "AmovPknlMstpSrasWrflDnon";

connectAs编辑

Type
String
Description
Found in States; Not used in Arma 2:OA anymore.
connectAs = "";

connectFrom[]编辑

Type
Array
Description
Found in States; Not used in Arma 2:OA anymore.
connectFrom[] = {};
connectFrom[] = {"TestSurrender", 0.9, "AdthPercMstpSlowWrflDnon_1", 0.9};

connectTo[]编辑

Type
Array
Description
Found in States, defines which animations can follow the current one, once it finishes. Although it allows for blending, ideally, the first pose of all animations from connectTo should be identical to the last pose of the current animation.
//AinvPknlMstpSnonWnonDnon_medic0S 
ConnectTo[] = {"AinvPknlMstpSnonWnonDnon_medic", 0.01,
    "AinvPknlMstpSnonWnonDnon_medic0", 0.01,
    "AinvPknlMstpSnonWnonDnon_medic1", 0.01,
    "AinvPknlMstpSnonWnonDnon_medic2", 0.01,
    "AinvPknlMstpSnonWnonDnon_medic3", 0.01,
    "AinvPknlMstpSnonWnonDnon_medic4", 0.01,
    "AinvPknlMstpSnonWnonDnon_medic5", 0.01};
//BasicDriver
ConnectTo[] = {"BasicDriverDying", 1.0};
connectTo[] = {"TestSurrender", 0.9, "AdthPercMstpSlowWrflDnon_1", 0.9};

Crouch编辑

Type
String
Description
Found in Actions, defines what happens when the AI crouch. There's also PlayerCrouch, which makes different crouching animations possible for players as opposed to AI.
Crouch = "AmovPknlMstpSnonWnonDnon";

D编辑

default编辑

Type
String
Description
Found in Actions, defines the default state for an action.
default = "LadderRifleStatic";

die编辑

Type
String
Description
Found in Actions, defines what animation/state is called when the character dies.
die = "AdthPercMstpSlowWrflDnon_r05";
die = "DeadState";

disableWeapons编辑

Type
Boolean
Description
Found in States, and unlike canPullTrigger, it can prohibit the character from firing his weapon.
disableWeapons = 1;

disableWeaponsLong编辑

Type
Boolean
Description
Found in States, and apparently the only time disableWeaponsLong differs from disableWeapons is when the weapon is lowered (Ctrl doubletap).
//AmovPercMstpSlowWrflDnon
disableWeapons = false;
disableWeaponsLong = true;
// or
disableWeaponsLong = 1;

down编辑

Type
String
Description
Found in Actions, tells what animation to play when hitting the "Go prone" key.
//class RifleBaseStandActions
down = "AmovPpneMstpSrasWrflDnon";
//class RifleProneActions
down = "AmovPercMstpSrasWrflDnon";
//??
 
down = "LadderRifleDownLoop";

duty编辑

Type
Float
Description
Duty used to mean some mandatory states/actions the character had to reach, before being able to perform a certain animation. Not sure about what this does in Arma anymore, if anything.
//OFP config
#define RunDuty -0.5
#define WalkDuty -0.7
#define RestDuty -1
#define CrawlDuty -0.0
#define SprintDuty 0.6
 
duty = -1;
duty = -0.7;
duty = -0.5;
duty = -0.4;
duty = 0.1;
duty = 0.2;
duty = 0.25;
duty = 0.3;
duty = 0.4;
duty = 0.5;
duty = 0.6;
duty = 2;

E编辑

enableAutoActions编辑

Type
Boolean
Description
Found in States. In Arma 2 there's a single occurrence of it being true: class TestDance.
enableAutoActions = 1;

enableBinocular编辑

Type
Boolean
Description
Found in States, defines whether the character can use binoculars or not.
enableBinocular = 1;
 
enableBinocular = false; //class CutSceneAnimationBase 
enableBinocular = false; //class AmovPercMrunSnonWbinDf_rfl
enableBinocular = true;  //class AwopPknlMstpSoptWbinDnon_rfl

enableMissile编辑

Type
Boolean
Description
Found in States, similar to disableWeapons. It enables/disables the firing of shoulder launched rockets (RPGs, MANPADS).
enableMissile = true; //class AidlPercMstpSrasWlnrDnon_player_idleSteady01
 
enableMissile = 1;

enableOptics编辑

Type
Boolean
Description
Found in States, enables/disables looking down the weapon sights.
enableOptics = 1;

equivalentTo编辑

Type
String
Description
Found in States, not sure what it does. The animation class is mostly equivalentTo another one, and oddly, sometimes to itself. Popular with healing, death, idle and cutscene animations.
equivalentTo = "";
 
class AdthPercMstpSrasWrflDnon_1 : AdthPercMstpSlowWrflDnon_1 {
    file = "\ca\Anims\Characters\data\Anim\Sdr\Dth\Erc\stp\ras\Rfl\AdthPercMstpSrasWrflDnon_1";
    speed = 0.72;
    equivalentTo = "AdthPercMstpSrasWrflDnon_1";
    ...
};
 
equivalentTo = "AmovPsitMstpSlowWrflDnon";

EvasiveBack编辑

Type
String
Description
Found in Actions, along with EvasiveForward, -Left and -Right. They point to the possible evasive animations that can be triggered.
EvasiveBack = "AmovPercMrunSlowWrflDf_AmovPercMevaSrasWrflDb";

EvasiveForward编辑

Type
String
Description
See EvasiveBack.
EvasiveForward = "AmovPercMevaSlowWlnrDf";

EvasiveLeft编辑

Type
String
Description
See EvasiveBack.
EvasiveLeft = "AmovPercMrunSlowWrflDf_AmovPercMevaSrasWrflDl";

EvasiveRight编辑

Type
String
Description
See EvasiveBack.
EvasiveRight = "AmovPpneMstpSrasWrflDnon_AmovPpneMevaSlowWrflDr";

F编辑

fast..编辑

Type
String
Description
Found in Actions, walk.. defines the walking animations, slow.. defines the running/jogging and fast.. the sprinting animations.

The suffixes mean the following: B (backward), F (forward), L (left strafe), R (right strafe) and a combination of these: RF (45 deg. strafe), RB (135 deg. strafe), LB (225 deg. strafe) and LF (315 deg. strafe).

fastB = "AswmPercMstpSnonWnonDnon";
fastB = "AmovPercMrunSrasWrflDb";
fastF = "AswmPercMsprSnonWnonDf";
fastL = "AswmPercMstpSnonWnonDnon";
fastLB = "AswmPercMstpSnonWnonDnon";
fastLF = "AswmPercMsprSnonWnonDf";
fastR = "AswmPercMstpSnonWnonDnon";
fastRB = "AswmPercMstpSnonWnonDnon";
fastRF = "AswmPercMsprSnonWnonDf";

file编辑

Type
String
Description
Found in States, points to the RTM animation file.
file = "\ca\Anims\Characters\data\Anim\Wmn\cts\erc\stp\non\non\ActsPercMstpSnonWnonDnon_MarianQ_shot5.rtm";

FireNotPossible编辑

Type
String
Description
Found in Actions.
FireNotPossible = "AmovPpneMstpSrasWrflDnon";

G编辑

getInCar编辑

Type
String
Description
getInCar and getOutCar are found in Actions; they define what animations to call when getting into/out of a car. Similar to getInTank/getOutTank.

None of these are really used in the Arma 2 config anymore (one exception: class LauncherKneelActions). Instead, getInHigh, -Medium and -Low are used with their respective getOuts. Assigning the different getIn actions for each vehicle is done in CfgVehicles.

getInAction = "GetInCar"; //CfgVehicles
 
getInCar = "AmovPknlMstpSrasWrflDnon";

GetInHigh编辑

Type
String
Description
See getInCar.
GetInHigh = "AmovPercMstpSnonWnonDnon_AcrgPknlMstpSnonWnonDnon_getInHigh";

GetInLow编辑

Type
String
Description
See getInCar.
GetInLow = "AmovPercMstpSnonWnonDnon_AcrgPknlMstpSnonWnonDnon_getInLow";

GetInMedium编辑

Type
String
Description
See getInCar.
GetInMedium = "AmovPercMstpSnonWnonDnon_AcrgPknlMstpSnonWnonDnon_getInMedium";

getInTank编辑

Type
String
Description
See getInCar.
getInTank = "AmovPknlMstpSrasWrflDnon";

getOutCar编辑

Type
String
Description
See getInCar.
getOutCar = "AmovPknlMstpSrasWrflDnon";

GetOutHigh编辑

Type
String
Description
See getInCar.
GetOutHigh = "AcrgPknlMstpSnonWnonDnon_AmovPercMstpSrasWrflDnon_getOutHigh";

GetOutLow编辑

Type
String
Description
See getInCar.
GetOutLow = "AcrgPknlMstpSnonWnonDnon_AmovPercMstpSrasWrflDnon_getOutLow";

GetOutMedium编辑

Type
String
Description
See getInCar.
GetOutMedium = "AcrgPknlMstpSnonWnonDnon_AmovPercMstpSrasWrflDnon_getOutMedium";

getOutTank编辑

Type
String
Description
See getInCar.
getOutTank = "AmovPknlMstpSrasWrflDnon";

H编辑

handGunOn编辑

Type
String
Description
Found in Actions, points to the animation to transition to, when the character draws it's pistol. It is not the transition animation itself, where the character brings up the pistol (and puts away his rifle/launcher if he had any), but the end result of that: character standing, aiming with the pistol.
handGunOn = "AmovPercMstpSrasWpstDnon"; //class RifleBaseLowStandActions
 
handGunOn = "AmovPpneMstpSrasWrflDnon";

hasCollShapeSafe编辑

Type
Boolean
hasCollShapeSafe = 0;

head编辑

Type
String
Description
Found in States, references BlendAnims class entries. Permits/forbids the character to rotate his head freely. Similar in functionality to aiming.
head = "headDefault";   //class Default
head = "headNo";        //class CutSceneAnimationBase
head = "empty";         //class HaloFreeFall_non

headDefault[]编辑

Type
Array
Description
Found in class BlendAnims, defines a set of bones, with weights associated to each of them.
headDefault[] = {"head", 1, "neck1", 0.5, "neck", 0.5};
 
headDefault[] = {};

headNo[]编辑

Type
Array
Description
Found in class BlendAnims, always an empty array. Serves for disabling free head movement (independent of the RTM animation).
headNo[] = {};

I编辑

interpolateFrom[]编辑

Type
Array
Description
Found in States, used together with interpolateTo for setting up two-way interpolation rules. interpolateFrom[] however, seems to have fallen in disuse.
interpolateFrom[] = {"TestSurrender", 0.9, "AdthPercMstpSlowWrflDnon_1", 0.9};

interpolateTo[]编辑

Type
Array
Description
Found in States; defines which animations can interrupt the current one, and how fast blending between the two should be.

Typically, animations will play to the end, then another animation will be played. Sometimes though, it's important to be able to just cut the current animation short, and immediately change to a different animation.

A good example would be death animations: if the character is half way through "eating a kebab" animation and the kebab explodes in his face, he won't continue munching. Instead he will play a death animation and fall to the ground right away.

To make the cut between the two animation less visually jarring, a couple of frames of transition/interpolation is provided, the length of which is what the numerical values stand for.

interpolateTo[] = {"AinvPknlMstpSlayWrflDnon", 0.01,
    "AinvPknlMstpSlayWrflDnon_1", 0.01,
    "AinvPknlMstpSnonWnonDnon_1", 0.01,
    "AinvPknlMstpSnonWnonDnon_2", 0.01,
    "AinvPknlMstpSnonWnonDnon_3", 0.01,
    "AinvPknlMstpSnonWnonDnon_4", 0.01,
    "AdthPknlMstpSnonWnonDnon_inventory", 0.1};

interpolateWith[]编辑

Type
Array
Description
Found in States, disused.
interpolateWith[] = {"BasicDriver", 0.02};

interpolationRestart编辑

Type
Boolean
Description
Found in States, true mostly for transition animations.
interpolationRestart = false;    //Default
interpolationRestart = true;     //DefaultDie
interpolationRestart = 2;

interpolationSpeed编辑

Type
Float
Description
Found in States.
interpolationSpeed = 200;    //AidlPercMstpSrasWrflDnon_aiming01, AdthPercMstpSrasWrflDnon_rS0 
interpolationSpeed = 30.5;   //AmovPercMstpSlowWrflDnon_player_idleSteady01
interpolationSpeed = 6;      //Default
interpolationSpeed = 0.5;    //AmovPknlMstpSrasWrflDnon_AmovPercMsprSrasWrflDf_2
interpolationSpeed = 0.1;    //AinjPfalMstpSnonWrflDnon_carried_Up

J编辑

JumpOff编辑

Type
String
Description
Found in Actions, disused.
JumpOff = "";

L编辑

ladderOff编辑

Type
String
Description
Found in States, defines what animation to switch to when letting go of the ladder.
ladderOff = "AmovPercMstpSnonWnonDnon";

ladderOffBottom编辑

Type
String
Description
Found in States, defines what animation to switch to when letting go of the ladder, having reached the bottom of it.
ladderOffBottom = "LadderRifleDownOff";

ladderOffTop编辑

Type
String
Description
Found in States, defines what animation to switch to when letting go of the ladder, having reached the top of it.
ladderOffTop = "LadderRifleTopOff";

ladderOnDown编辑

Type
String
Description
Found in States, defines what animation to switch to when getting onto the bottom of the ladder.
ladderOnDown = "LadderRifleOn";

ladderOnUp编辑

Type
String
Description
Found in States, defines what animation to switch to when getting onto the top of the ladder.
ladderOnUp = "LadderRifleOn";

leaning编辑

Type
String
Description
Found in both Actions and States, references BlendAnims class entries. Defines how much each bone/bodypart should be influenced when leaning.

Leaning, similar to aiming, is not an animation played back from a file. It's procedural, if you will, and so needs extra setting up in the config to look it's best.

leaning = "leaningDefault";    //Default
leaning = "aimingLying";       //AmovPpneMstpSrasWrflDnon_injured
leaning = "empty";             //class AmovPpneMrunSlowWrflDf - disables leaning while prone

leaningCorrectionAngleBeg编辑

Type
Float
Description
Not used in Arma 2, appearing only once in Arma config, where both leaningCorrectionAngleBeg and leaningCorrectionAngleEnd are zero.
leaningCorrectionAngleBeg = 0;
leaningCorrectionAngleEnd = 0;

leaningFactorBeg编辑

Type
Float
Description
Found in States, leaningFactorBeg sets how much influence leaning has at the start of an animation, while leaningFactorEnd takes care of the end. If the two values differ, leaning is blended in or out during the animation.
leaningFactorBeg = 1;    //StandBase
leaningFactorEnd = 1;
 
leaningFactorBeg = 0;    //SprintBaseDf
leaningFactorEnd = 0;
 
leaningFactorBeg = 0.5;  //AmovPknlMstpSrasWlnrDnon - limited (half) leaning with launcher
leaningFactorEnd = 0.5;
 
leaningFactorBeg = 0.75; //AmovPercMwlkSlowWrflDf - limited leaning while walking with rifle raised
leaningFactorEnd = 0.75;
 
leaningFactorBeg = 1;    //amovpercmstpsraswrfldnon_amovpercmstpsraswlnrdnon
leaningFactorEnd = 0.5;
 
leaningFactorBeg = 1;    //AmovPercMstpSrasWrflDnon_AmovPpneMstpSrasWrflDnon
leaningFactorEnd = 0;    // -transition betwen a state with full leaning to one where leaning is forbidden-

leaningFactorEnd编辑

Type
Float
Description
See above.
leaningFactorEnd = 0.75;

leaningFactorZeroPoint编辑

Type
Float
Description
Appears only once in both Arma & Arma 2, no variation across States or Actions.
leaningFactorZeroPoint = -1;

leanLRot编辑

Type
Float
Description
Found in Actions, sets the amount of lean possible and the angle of leaning.

With a value of 1, the character will lean about 70 degrees off vertical, looking like it just broke it's back, so the more reasonable amount to lean is about half of that. Doctor's orders.

leanLRot = 0;      //NoActions, RifleProneActions
leanLRot = 0.5;    //RifleBaseLowStandActions
leanLRot = 0.57;   //CivilStandActions

leanLShift编辑

Type
Float
Description
Found in Actions. In addition to tilting the upper body during leaning, it's also possible to move it into the lean.

Typical values are very small, anything else will produce excessive deformations of the model.

leanLShift = 0;       //class RifleProneActions
leanLShift = 0.01;    //class RifleBaseLowStandActions
leanLShift = 0.07;    //class CivilStandActions

leanRRot编辑

Type
Float
Description
See leanLRot.
leanRRot = 0.57;

leanRShift编辑

Type
Float
Description
See leanLShift.
leanRShift = 0.01;

leftHandIKBeg编辑

Type
Boolean
Description
Found in States, appeared in Arma, complemented/superseded in Arma 2 by leftHandIKCurve[].

These properties set whether at the beginning and end of the animation, IKs for both arms are enabled or not.

left/right-HandIKCurve[] allows for a more complex and detailed control of FK/IK (see below for more details) blending.

Typical uses:

leftHandIKBeg = true;
leftHandIKCurve[] = {1};
leftHandIKEnd = true;
 
leftHandIKBeg = false;
leftHandIKCurve[] = {};
leftHandIKEnd = false;
 
leftHandIKBeg = false;
leftHandIKCurve[] = {0, 1, 0.075, 0, 0.725, 0, 0.8, 1};
leftHandIKEnd = false;
 
leftHandIKBeg = false;
leftHandIKCurve[] = {0.05, 1, 0.125, 0, 0.6, 0, 0.675, 1};
leftHandIKEnd = true;

leftHandIKEnd编辑

Type
Boolean
Description
See above.
leftHandIKEnd = 0;

leftHandIKCurve编辑

Type
Array
Description
As the name suggests, this array describes the curve controlling FK/IK blending on the left arm.

Every pair of values describe a 2D point, with the first number representing time (horizontal) and the second being the weight (vertical).

Time ranges from 0-1, where 0 is animation start, 0.5 is half way, and 1 the end.

Weight also ranges from 0-1, where 0 means animation is taken from RTM file (FK) and IK is disabled, 0.6 meaning a 40% blend of FK and 60% IK, and 1 is 100% IK.

Let me interpret the last example below (the long one). The curve has 4 points [0, 1], [0.05, 0], [0.95, 0] and [1, 1]. When the animation starts playing, the IK takes full effect, but is gradually disabled by point #2. It stays disabled until point #3 towards the end, when it's weight starts climbing again. At the end, at point #4, the IK is fully on again, overriding all FK.

leftHandIKCurve[] = {};                                //IK OFF.
leftHandIKCurve[] = {1};                               //IK fully ON.
leftHandIKCurve[] = {0.1, 1, 0.15, 0};                 //IK fully ON one-tenth into the animation, but disabled soon afterwards.
leftHandIKCurve[] = {0, 1, 0.05, 0, 0.95, 0, 1, 1};    //IK ON at start, but soon disabled. Re-enabled towards the end.

legs编辑

Type
String
Description
Found in States, references BlendAnims class entries. Used for deforming the character on sloping surfaces (hillside, stairs, etc..).

Most of the RTM animations have been recorded in a motion capture studio, on a perfectly flat floor. When standing on a slope, the character would normally have one foot sinking into the ground, while the other would be hanging in the air. So BI devised this system for deforming the bodyparts that have contact with the ground.

When standing upright, it's just the legs. When prone, it's most, if not the whole body. Like everything else in BlendAnims, it's a list of bones, with weights (amount of influence) associated.

legs = "legsDefault";        //Deafault
legs = "legsNo";             //DefaultDie
legs = "legsLyingAiming";    //AmovPpneMstpSrasWrflDnon_injured
legs = "Wholebody";          //AmovPpneMstpSnonWnonDnon
legs = "empty";              //HaloFreeFall_non

legsDefault[]编辑

Type
Array
Description
BlendAnims class entry. See above.
legsDefault[] = {"LeftUpLeg", 0.9, "LeftUpLegRoll", 0.9, "LeftLeg", 0.95, "LeftLegRoll", 0.95, "LeftFoot", 1, "LeftToeBase", 1,
    "RightUpLeg", 0.9, "RightUpLegRoll", 0.9, "RightLeg", 0.95, "RightLegRoll", 0.95, "RightFoot", 1, "RightToeBase", 1};

legsNo[]编辑

Type
Array
Description
Always empty BlendAnims class entry, see legs above. Disables all deformations on contact with land. Death animations are a typical case.
legsNo[] = {};

limitFast编辑

Type
Float
Description
Found in Actions, used for limiting the slow.. movements, although the names suggests a limiting of fast...
limitFast = 0.5;    //RifleProneActions_injured
limitFast = 2;      //SwimmingActions
limitFast = 4;      //class CivilStandActions, SwimmingFastActions
limitFast = 5;      //NoActions
limitFast = 5.5;    //RifleBaseLowStandActions

limitGunMovement编辑

Type
Boolean
Description
Found in States.
limitGunMovement = false;    //HealBase
limitGunMovement = false;    //SprintBaseDf
limitGunMovement = 0.1;      //AmovPercMstpSnonWnonDnon
limitGunMovement = 0.3;      //AovrPercMstpSlowWrflDf
limitGunMovement = 0.6;      //AmovPercMwlkSlowWpstDnon_transition
limitGunMovement = true;     //Default

looped编辑

Type
Boolean
Description
Found in States, sets whether the current animation should start over once it's finished. Loop, that is.
looped = 1;

Lying编辑

Type
String
Description
Found in Actions, points to the animation to play for the "Prone with weapon" situation. CivilLying is the unarmed equivalent.
Lying = "AmovPpneMstpSnonWnonDnon";

M编辑

medic编辑

Type
String
Description
Found in Actions, points to the animation to be used by a medic when triggering the "Heal.." action.
medic = "AinvPknlMstpSlayWrflDnon_medic";

O编辑

onLadder编辑

Type
Boolean
Description
Found in States, flags the animation as ladder related.
onLadder = 1;

onLandBeg编辑

Type
Boolean
Description
Found in States. If at the start of the animation the character is lying on the ground (prone), onLandBeg equals true. If at the end of the animation the character is lying on the ground (prone), onLandEnd equals true. Otherwise false. Not sure what these flags are used for.
//Default
onLandBeg = false;
onLandEnd = false;
 
//AmovPercMstpSrasWrflDnon_AmovPpneMstpSrasWrflDnon 
onLandBeg = false;
onLandEnd = true;
 
//AmovPpneMstpSrasWrflDnon_AmovPercMstpSrasWrflDnon 
onLandBeg = true;
onLandEnd = false;
 
//AmovPpneMstpSrasWrflDnon_AmovPpneMstpSrasWpstDnon 
onLandBeg = true;
onLandEnd = true;
 
//AdthPpneMstpSnonWnonDnonB
onLandEnd = true;
onLandBeg = false;

onLandEnd编辑

Type
Boolean
Description
See above.
onLandEnd = 1;

P编辑

PlayerCrouch编辑

Type
String
Description
Found in Actions. Similar to Crouch, except it applies only to player characters and not AI.
PlayerCrouch = "AmovPknlMstpSrasWlnrDnon";

PlayerProne编辑

Type
String
Description
Found in Actions. Similar to Lying, except it applies only to player characters and not AI.

Sets the animation to be used when going prone.

PlayerProne = "AmovPpneMstpSnonWnonDnon";

PlayerStand编辑

Type
String
Description
Found in Actions. Similar to Stand, except it applies only to player characters and not AI.

Sets the animation to be used when standing upright.

PlayerStand = "AwopPercMstpSoptWbinDnon_rfl";

predictSpeedCoef编辑

Type
Float
Description
Disused in Arma 2, appears once in Arma.
predictSpeedCoef = 1;

preload编辑

Type
Boolean
Description
Found in States, sets whether to load the animation file (RTM) into memory at game start, or just read it from disc when there's a demand for it.

All animations are set not to preload in Arma 2, while in Arma some often used animations like running for example, are preloaded.

preload = 1;

primaryActionMaps[]编辑

Type
Array
Description
Outlines the main action groups.
primaryActionMaps[] = {"DeadActions", "LauncherKneelActions", "BinocProneRflActions", "BinocProneCivilActions",
    "RifleProneActions", "PistolProneActions", "RifleKneelActions", "PistolKneelActions", "RifleStandActions",
    "PistolStandActions", "RifleLowStandActions", "SwimmingActions", "CivilStandActions",
    "BinocKneelRflActions", "BinocStandRflActions"};

putDown编辑

Type
String
Description
Found in Actions. Sets the animation to be used when the character puts something on the ground (e.g. dropping some equipment).
putDown = "AmovPpneMstpSrasWrflDnon";

PutDownEnd编辑

Type
Float
Description
Not used in the Arma series.
PutDownEnd = "";

R编辑

reload...编辑

Type
String
Description
Found in Actions. Default actions for reloading are reloadMagazine, reloadAT, reloadMGun and reloadMortar, but addon makers can add their own if they wish.

These actions are invoked in CfgWeapons and CfgMagazines via reloadAction. Most reload actions for upright stances in Arma 2 are bone-masked, they are configured as Gestures.

//game
reloadAT = "LauncherReloadKneel";
reloadMagazine[] = {"WeaponMagazineReloadStand", "Gesture"};
reloadMGun = "AmovPpneMstpSrasWrflDnon";
reloadMortar = "AmovPpneMstpSrasWrflDnon";
 
//custom
reloadM1Garand[] = {"M1GarandMagazineReloadStand", "Gesture"};
//CfgWeapons/CfgMagazines
reloadAction = "ManActReloadM1Garand";

relSpeedMax编辑

Type
Float
Description
Found in States.
relSpeedMax = 0.6;

relSpeedMin编辑

Type
Float
Description
Found in States.
relSpeedMin = 0.5;

rightHandIKBeg编辑

Type
Boolean
Description
See leftHandIKBeg.
rightHandIKBeg = 1;

rightHandIKEnd编辑

Type
Boolean
Description
See leftHandIKBeg.
rightHandIKEnd = 1;

rightHandIKCurve编辑

Type
Array
Description
See leftHandIKCurve.
rightHandIKCurve[] = {};                                //IK OFF.
rightHandIKCurve[] = {1};                               //IK fully ON.
rightHandIKCurve[] = {0.1, 1, 0.15, 0};                 //IK fully ON one-tenth into the animation, but disabled soon afterwards.
rightHandIKCurve[] = {0, 1, 0.05, 0, 0.95, 0, 1, 1};    //IK ON at start, but soon disabled. Re-enabled towards the end.

S编辑

salute..编辑

Type
String
Description
Found in Actions, salute points to the animation the character will transition to when saluting, while saluteOff points to the animation the character should return to when done saluting.

Neither of these properties point to the transition animations, where the character is actually raising/lowering it's arm.

salute = "AmovPercMstpSlowWrflDnon_salute";
saluteOff = "AmovPercMstpSlowWrflDnon";

showHandGun编辑

Type
Boolean
Description
Found in States, sets pistol visibility on/off.
showHandGun = 1;

showItemInHand编辑

Type
Boolean
Description
Found in States, sets item (binoculars, NVG) visibility on/off.
showItemInHand = 1;

showItemInRightHand编辑

Type
Boolean
Description
Found in States, sets item (binoculars, NVG) visibility on/off in the right hand.
showItemInRightHand = 0;

showWeaponAim编辑

Type
Boolean
Description
Found in States, sets whether crosshairs are displayed or not for given animation.
showWeaponAim = 1;

sitDown编辑

Type
String
Description
Found in Actions, points to the animation to transition to when the sitting action is triggered. Not the to and from transition animations, but the sitting idle.
SitDown = "";       //RifleStandSaluteActions_Idle - can't sit down while saluting
sitDown = "AmovPsitMstpSlowWrflDnon";

skeletonName编辑

Type
String
Description
Sets the skeleton to be used.
skeletonName = "OFP2_ManSkeleton";
skeletonName = "WomanSkeleton";

slow..编辑

Type
String
Description
See fast...
slowB = "AmovPercMrunSlowWlnrDb";
slowF = "AmovPercMevaSlowWlnrDf";
slowL = "AmovPercMrunSlowWlnrDl";
slowLB = "AmovPercMrunSlowWlnrDbl";
slowLF = "AmovPercMrunSlowWlnrDfl";
slowR = "AmovPercMrunSlowWlnrDr";
slowRB = "AmovPercMrunSlowWlnrDbr";
slowRF = "AswmPercMrunSnonWnonDf";

soundEdge..编辑

Type
Array
Description
Found in States. Deprecated forms soundEdge1, soundEdge2 (used very little in Arma, not at all in Arma 2).

Used for sound timing during an animation. If there's a sound file associated with the animation, it won't play right away as the animation starts. It will play when and as many times as soundEdge tells it to.

soundEdge[] = {0.5, 1};                //Default
soundEdge[] = {0.45};                  //DefaultDie
soundEdge[] = {0.25, 0.5, 0.75, 1};    //AmovPercMwlkSlowWrflDf - timing of the 4 footstep sounds
 
//old
soundEdge1 = 0.5;
soundEdge2 = 1;

soundEnabled编辑

Type
Boolean
Description
Found in States, enables/disables sounds being played with the animation.
soundEnabled = 1;

soundOverride编辑

Type
String
Description
Found in States, points to the actual sound to play with the animation.
soundOverride = "bodyfall";

speed编辑

Type
Float
Description
Found in States, sets the animation playback speed.

Note that speed depends on animation length, on the number of frames it contains.

For example, setting speed at 0.5 for a 50 frames long animation will result in it playing at about 25 frames per second. Setting the same speed for a 300 frame animation, will result in that animation playing much faster. Speed, seems to me more akin to duration.

speed = 0.00833333;

stand编辑

Type
String
Description
Found in Actions, see playerStand.
Stand = "AmovPknlMstpSrasWrflDnon";

startSwim编辑

Type
String
Description
Found in Actions, points to the animation to be used when starting to swim.
startSwim = "AswmPercMrunSnonWnonDf";

stop编辑

Type
String
Description
Found in Actions, points to the animation to be used when stopping.
stop = "AinvPknlMstpSlayWrflDnon";

stopRelaxed编辑

Type
String
Description
Found in Actions, points to the animation to be used when stopping with weapon lowered ("SAFE" behaviour).
StopRelaxed = "AidlPercMstpSlowWrflDnon01";

stopSwim编辑

Type
String
Description
Found in Actions, points to the animation to be used when ending swimming.
stopSwim = "AmovPercMstpSnonWnonDnon";

strokeFist编辑

Type
Float
Description
Found in Actions, not really used. Has been around since OFP if I remember correctly, probably an attempt to introduce fist fighting, but then abandoned.
StrokeFist = "";

strokeGun编辑

Type
String
Description
Similar to strokeFist above, attempt at melee fighting but not used.
strokeGun = "AmovPercMstpSnonWnonDnon";

T编辑

takeFlag编辑

Type
String
Description
Found in Actions, points to the animation to be used when taking the flag during a CTF match.
takeFlag = "AinvPknlMstpSlayWrflDnon";

terminal编辑

Type
Boolean
Description
Found in States, flags the animation as being "terminal". True for death animations, false for everything else.
terminal = 1;

testDriver编辑

Type
String
Description
Found in Actions, along with testDriverOut and TestGunner. "Test" suggests it might have been just that, an experiment during development.
//class ManActions
TestDriver = "BasicDriver";
TestDriverOut = "BasicDriverOut";
TestGunner = "BasicSittingGunner";

testDriverOut编辑

Type
String
Description
See above.
TestDriverOut = "BasicDriverOut";

testGunner编辑

Type
String
Description
See testDriver.
TestGunner = "BasicSittingGunner";

throwGrenade编辑

Type
String
Description
Found in Actions, points to the animation to be used when throwing a grenade.
throwGrenade = "AmovPercMrunSlowWpstDf_AmovPercMstpSrasWpstDnon_gthThrow";

transitionsDisabled[]编辑

Type
Array
Description
Empty array in both Arma & Arma 2. No apparent use for it.
transitionsDisabled[] = {};

transitionsInterpolated[]编辑

Type
Array
Description
Empty array in both Arma & Arma 2. No apparent use for it.
transitionsInterpolated[] = {};

transitionsSimple[]编辑

Type
Array
Description
Empty array in both Arma & Arma 2. No apparent use for it.
transitionsSimple[] = {};

treated编辑

Type
String
Description
Found in Actions, points to the animation to be used when being healed by a medic. Medic will be using animation defined in medic.
treated = "AinvPknlMstpSlayWrflDnon_healed";

turn...编辑

Type
String
Description
Found in Actions, turnL and turnR define the turning animations, while turnLRelaxed and turnRRelaxed do the same thing for the "relaxed" (weapon lowered, behaviour "SAFE") modes.
turnL = "AmovPercMstpSlowWrflDnon_turnL";
turnLRelaxed = "AmovPercMstpSlowWrflDnon_turnL";
turnR = "AmovPpneMstpSrasWrflDnon_turnR";
turnRRelaxed = "AmovPpneMstpSrasWrflDnon_turnR";

turnSpeed编辑

Type
Float
Description
Found in Actions, sets turning speed.
turnSpeed = 0.1;

U编辑

untiltWeapon编辑

Type
String
Description
Not found in Arma 2, and not really used in Arma either.
untiltWeapon = "untiltWeaponDefault";

untiltWeaponDefault[]编辑

Type
Array
Description
Same as above.
untiltWeaponDefault[] = {};

up编辑

Type
String
Description
Found in Actions. Together with down sets up what looks like a standing/kneeling/prone toggle. Which I don't think is used in the game's current control scheme.
up = "AmovPknlMstpSlowWrflDnon";    //RifleBaseLowStandActions
up = "AmovPknlMstpSrasWrflDnon";    //RifleBaseStandActions
up = "AmovPknlMwlkSlowWrflDf";      //RifleLowStandActionsWlkF
up = "AmovPercMstpSrasWrflDnon";    //RifleKneelActions

upDegree编辑

Type
String
Description
Found in Actions, seems to define the "upright" stance for each action group.

These "ManPos.." things only appear in root /Dta/bin/config.bin, where they get some equivalent numbers, and that's it. Important to get right though when creating custom action sets.

upDegree = 0;                        //NoActions
upDegree = -1;                       //NoActions, ParachuteFreeFall
upDegree = "ManPosDead";             //DeadActions
upDegree = "ManPosStand";            //RifleBaseLowStandActions
upDegree = "ManPosCombat";           //RifleBaseStandActions
upDegree = "ManPosCrouch";           //RifleKneelEvasiveActions, RifleKneelActions
upDegree = "ManPosLying";            //RifleProneActions
upDegree = "ManPosHandGunStand";
upDegree = "ManPosHandGunCrouch";
upDegree = "ManPosHandGunLying";
upDegree = "ManPosNoWeapon";         //CivilStandActions
upDegree = "ManPosLyingNoWeapon";
upDegree = "ManPosWeapon";           //LauncherKneelActions
upDegree = "ManPosBinocStand";       //BinocStandLnrActions
upDegree = "ManPosSwimming";
upDegree = "ManPosBinocStand";
upDegree = "ManPosBinoc";
updegree = "ManPosCrouch";
//enum in root config
enum {
    MANPOSNOWEAPON = 12,
    CPCOMMANDER = 2,
    CMD_STAY_BACK = 4,
    CMD_MOVE = 12,
    CMD_FIRE = 27,
    CMD_WATCH = 28,
    CMD_REPLY_FAIL = 64,
    CMD_REPORT = 68,
    ...
    MANPOSHANDGUNSTAND = 9,
    ...
    MANPOSCROUCH = 6,
    ...
    MANPOSHANDGUNLYING = 5,
    MANPOSHANDGUNCROUCH = 7,
    MANPOSBINOCSTAND = 14,
    ...
    MANPOSDEAD = 0,
    MANPOSCOMBAT = 8,
    ...
    MANPOSBINOCLYING = 2,
    MANPOSSTAND = 10,
    MANPOSSWIMMING = 11,
    COMPARTMENT3 = 4,
    CMD_ACTION = 2,
    CMD_FORM_ECHLEFT = 16,
    ...
    MANPOSWEAPON = 1,
    ...
    MANPOSLYING = 4,
    ...
    MANPOSLYINGNOWEAPON = 3,
    MANPOSBINOC = 13,
    ...
};

useFastMove编辑

Type
Boolean
Description
Found in Actions. True for action sets containing "Evasive" in the classname, so an obscure flag of some sorts in Arma. Not used in any significant way in Arma 2.
useFastMove = 1;

V编辑

variantAfter[]编辑

Type
Array
Description
Found in States when there are several variations on the same animation (usually idles) that can be played randomly.

Minimum, average and maximum - these are the inputs for the random number generator, similar to how trigger timeout/countdown works in the mission editor.

variantAfter[] = {5, 10, 20};     //Default
VariantAfter[] = {5, 5, 5};       //AinvPknlMstpSnonWnonDnon_medic0S 
variantAfter[] = {2, 3, 5};       //AidlPercMstpSlowWrflDnon_player_0S
variantAfter[] = {0, 0, 0};       //AidlPercMstpSrasWrflDnon_aiming0S

variantsAI[]编辑

Type
Array
Description
Found in States when there are several variations on the same animation (usually idles) that can be played randomly.

It lists the animations to be randomly cycled. The numbers represent the probability of that animation being played, the higher the number, the more likely the animation will get to play.

The sum of these numbers is always 1.

//Default
variantsAI[] = {""};    
//AidlPercMstpSnonWnonDnon          
variantsAI[] = {"AidlPercMstpSnonWnonDnon01", 0.01,
    "AidlPercMstpSnonWnonDnon02", 0.01,
    "AidlPercMstpSnonWnonDnon03", 0.01,
    "AidlPercMstpSnonWnonDnon04", 0.01,
    "AidlPercMstpSnonWnonDnon05", 0.01,
    "AidlPercMstpSnonWnonDnon06", 0.01,
    "AidlPercMstpSnonWnonDnon07", 0.01,
    "AidlPercMstpSnonWnonDnon08", 0.01,
    "AidlPercMstpSnonWnonDnon_idleSteady04", 0.23,
    "AidlPercMstpSnonWnonDnon_idleSteady03", 0.23,
    "AidlPercMstpSnonWnonDnon_idleSteady02", 0.23,
    "AidlPercMstpSnonWnonDnon_idleSteady01", 0.23};
//ActsPsitMstpSnonWnonDnon_varSittingOnTheWall
variantsAI[] = {"Mi17_Cargo02", 0.4, "Mi17_Cargo02_V1", 0.1, "Mi17_Cargo02_V2", 0.1, "Mi17_Cargo02_V3", 0.1,
    "Mi17_Cargo02_V4", 0.1, "Mi17_Cargo02_V5", 0.1, "Mi17_Cargo02_V6", 0.1};
//aidlpercmstpsraswlnrdnon_S
variantsAI[] = {"aidlpercmstpsraswlnrdnon_1", 0.333, "aidlpercmstpsraswlnrdnon_2", 0.333, "aidlpercmstpsraswlnrdnon_3", 0.334};

variantsPlayer[]编辑

Type
Array
Description
Same as variantsAI[] above, except for player characters.
variantsPlayer[] = {"AdthPercMrunSlowWlnrDf_1", 0.5, "AdthPercMrunSlowWlnrDf_2", 0.5};

visibleSize编辑

Type
Float
Description
Found in States, probably used for calculating how visible a character is for the AI, based on his stance/animation.
visibleSize = 1.00012;       //SprintBaseDf                  when sprinting more visible than..
visibleSize = 0.700121;      //AmovPercMstpSrasWrflDnon      ..when stopped > visible than..
visibleSize = 0.300122;      //AmovPknlMstpSlowWrflDnon      ..when kneeling > visible than..
visibleSize = 0.100123;      //AmovPpneMstpSrasWrflDnon      ..when prone.

W编辑

walk..编辑

Type
String
Description
See fast...
walkB = "AmovPercMwlkSlowWrflDb";
walkF = "AmovPercMevaSlowWlnrDf";
walkL = "AmovPercMwlkSlowWrflDl";
walkLB = "AmovPercMwlkSlowWrflDbl";
walkLF = "AswmPercMwlkSnonWnonDf";
walkR = "AmovPpneMrunSnonWnonDr";
walkR = "AswmPercMstpSnonWnonDnon";
walkRB = "AmovPercMwlkSlowWrflDbr";
walkRF = "AmovPercMwlkSlowWrflDfr";

weaponOff编辑

Type
String
Description
The opposite of weaponOn below.
weaponOff = "AmovPercMstpSrasWrflDnon";

weaponOn编辑

Type
String
Description
Found in States, and references the animation that needs to be reached when switching to RPGs/MANPADS.
weaponOn = "AmovPknlMstpSrasWlnrDnon";       //RifleBaseLowStandActions
weaponOff = "AmovPercMstpSrasWrflDnon";
 
weaponOn = "AmovPknlMstpSrasWlnrDnon";       //RifleKneelActions
weaponOff = "AmovPknlMstpSrasWrflDnon";
 
weaponOn = "AmovPknlMstpSrasWlnrDnon";       //RifleProneActions
weaponOff = "AmovPpneMstpSrasWrflDnon";

更多维基

随机维基