Fandom

武装突袭 Wiki

Post process effects

简体 | 繁體

4,827个页面创建
于此维基上
添加新页面
评论0 分享

您使用了广告屏蔽软件!


Wikia通过广告运营为用户提供免费的服务。我们对用户通过嵌入广告屏蔽软件访问网站进行了使用调整。

如果您使用了广告屏蔽软件,将无法使用我们的服务。请您移除广告屏蔽软件,以确保页面正常加载。

Scripting commands编辑

Effect creation:

hndl = ppEffectCreate ["effect_type", priority]; hndls[] = ppEffectCreate [["effect_type0", priority0], ["effect_type1", priority1], ...];

Effect cancellation:

ppEffectDestroy hndl; ppEffectDestroy [hndl0, hndl1, ..., hndlN];

Parameter setup:

hndl ppEffectAdjust [par0, par1, .... , parN];

Parameter application:

hndl ppEffectCommit time; [hndl0, ..., hndlN] ppEffectCommit time;

Effect permission:

hndl ppEffectEnable OnOf; [hndl0, ..., hndlN] ppEffectEnable OnOf;

Check if enabled (Since Arma v1.55.133445):

ppEffectEnabled hndl;

Priority defines sequence in which are post effects applied.

Example编辑

_hndl = ppEffectCreate ["colorCorrections", 1501]; _hndl ppEffectEnable true; _hndl ppEffectAdjust [1.0, 1.0, 0.0, [1.0, 0.1, 1.0, 0.75], [0.0, 1.0, 1.0, 1.0], [0.199, 0.587, 0.114, 0.0]]; _hndl ppEffectCommit 0; sleep 10; ppEffectDestroy _hndl;

Table of priorities编辑

Priority PostEffect Popis
2050 FilmGrain CfgOpticsEffect::TankCommanderOptics1(2)
1550 ColorCorrections CfgOpticsEffect::TankGunnerOptics1(2)
450 DynamicBlur CfgOpticsEffect::OpticsBlur1(2,3)
250 Chromatic Aberration CfgOpticsEffect::OpticsCHAbera1(2,3)


Parameters of individual effects编辑

RadialBlur编辑

Title: "RadialBlur"; Base Priority: 100

Will not do anything if RADIAL BLUR is disabled in Video Options.

Parameter Meaning Type Range
powerX, powerY relative blur degree on axes X,Y float 0...
offsetX, offsetY relative size (X,Y) of un-blurred centre float 0...

Syntax: hndRadBlur ppEffectAdjust [powerX, powerY, offsetX, offsetY];

Defaults: hndRadBlur ppEffectAdjust [0.01, 0.01, 0.06, 0.06];

Copypaste example: 0 = ["RadialBlur", 100, [100, 0.5, 0.1, 0.5]] spawn { params ["_name", "_priority", "_effect", "_handle"]; while { _handle = ppEffectCreate [_name, _priority]; _handle < 0 } do { _priority = _priority + 1; }; _handle ppEffectEnable true; _handle ppEffectAdjust _effect; _handle ppEffectCommit 5; waitUntil {ppEffectCommitted _handle}; uiSleep 3; comment "admire effect for a sec"; _handle ppEffectEnable false; ppEffectDestroy _handle; };

ChromAberration编辑

Title "ChromAberration"; Base Priority: 200

Parameter Meaning Type Range
aberationPowerX, aberationPowerY relative effect strength (sample spacing from each other) axes X, Y float
correction correction according to screen aspect ratio bool

Syntax: hndlChromAberr ppEffectAdjust [aberationPowerX, aberationPowerY, correction];

Defaults: hndlChromAberr ppEffectAdjust [0.005, 0.005, false];

Copypaste example: 0 = ["ChromAberration", 200, [0.05, 0.05, true]] spawn { params ["_name", "_priority", "_effect", "_handle"]; while { _handle = ppEffectCreate [_name, _priority]; _handle < 0 } do { _priority = _priority + 1; }; _handle ppEffectEnable true; _handle ppEffectAdjust _effect; _handle ppEffectCommit 5; waitUntil {ppEffectCommitted _handle}; uiSleep 3; comment "admire effect for a sec"; _handle ppEffectEnable false; ppEffectDestroy _handle; };

WetDistortion编辑

Title: "WetDistortion"; Base Priority: 300

Effect cancels automatically under water.

Parameter Meaning Type Range
value effect blurriness (0 to 1, values above 1 cause unusual) float 0...1
top, bottom effect power (top/bottom of screen separately) float 0...1
horizontal1, horizontal2, vertical1, vertical2 waves speeds (frequency/PI) float
horizontal1, horizontal2, vertical1, vertical2 waves amplitudes float
randX, randY, posX, posY phase coefficients: random value influence coefficient inside vertex float

Syntax: hndlWetDist ppEffectAdjust [ value, top, bottom, horizontal1, horizontal2, vertical1, vertical2, horizontal1, horizontal2, vertical1, vertical2, randX, randY, posX, posY ];

Defaults: hndlWetDist ppEffectAdjust [ 1, 1, 1, 4.10, 3.70, 2.50, 1.85, 0.0054, 0.0041, 0.0090, 0.0070, 0.5, 0.3, 10.0, 6.0 ];

Copypaste example: 0 = ["WetDistortion", 300, [ 1, 0, 1, 4.10, 3.70, 2.50, 1.85, 0.0054, 0.0041, 0.05, 0.0070, 1, 1, 1, 1 ]] spawn { params ["_name", "_priority", "_effect", "_handle"]; while { _handle = ppEffectCreate [_name, _priority]; _handle < 0 } do { _priority = _priority + 1; }; _handle ppEffectEnable true; _handle ppEffectAdjust _effect; _handle ppEffectCommit 5; waitUntil {ppEffectCommitted _handle}; uiSleep 3; comment "admire effect for a sec"; _handle ppEffectEnable false; ppEffectDestroy _handle; };

ColorCorrections编辑

Title: "ColorCorrections"; Base Priority: 1500

Parameter Meaning Type Range
brightness image brightness (0 - black, 1 - unchanged, 2 - white ) float 0...2
contrast image contrast (1 - normal contrast) float 0...
offset image contrast offset (0 - unchanged ) float
blendR, blendG, blendB, blendA color for blending ( R,G,B - color, A - blend factor (0 - original color, 1 - blend color )) float 0...1
colorizeR, colorizeG, colorizeB, colorizeA color for colorization ( R,G,B - color, A - saturation (0 - original color, 1 - B&W multiplied by colorize color)) float 0...1
weightR, weightG, weightB, NA RGB weights for desaturation (0.299, 0.587, 0.114, NA) float
width, height, radius, xOffset, yOffset, borderThickness, borderStrength (Arma 3 only?) float

Syntax: hndlClrCorr ppEffectAdjust [ brightness, contrast, offset, blendR, blendG, blendB, blendA, colorizeR, colorizeG, colorizeB, colorizeA, weightR, weightG, weightB, NA ];

Defaults: hndlClrCorr ppEffectAdjust [ 1, 1, 0, 0, 0, 0, 0, 1, 1, 1, 1, 0.299, 0.587, 0.114, 0 ];

Copypaste example: 0 = ["ColorCorrections", 1500, [ 1, 0.4, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 0 ]] spawn { params ["_name", "_priority", "_effect", "_handle"]; while { _handle = ppEffectCreate [_name, _priority]; _handle < 0 } do { _priority = _priority + 1; }; _handle ppEffectEnable true; _handle ppEffectAdjust _effect; _handle ppEffectCommit 5; waitUntil {ppEffectCommitted _handle}; uiSleep 3; comment "admire effect for a sec"; _handle ppEffectEnable false; ppEffectDestroy _handle; };

DynamicBlur编辑

Title: "DynamicBlur"; Base Priority: 400

Parameter Meaning Type Range
value blurriness float 0...

Syntax: hndlDynBlur ppEffectAdjust [value];

Defaults: hndlDynBlur ppEffectAdjust [0];

Copypaste example: 0 = ["DynamicBlur", 400, [10]] spawn { params ["_name", "_priority", "_effect", "_handle"]; while { _handle = ppEffectCreate [_name, _priority]; _handle < 0 } do { _priority = _priority + 1; }; _handle ppEffectEnable true; _handle ppEffectAdjust _effect; _handle ppEffectCommit 5; waitUntil {ppEffectCommitted _handle}; uiSleep 3; comment "admire effect for a sec"; _handle ppEffectEnable false; ppEffectDestroy _handle; };

FilmGrain编辑

Title: "FilmGrain"; Base Priority 2000

Number of parameters is flexible ... it may be defined 1 to 6 parameters, meaning of individual parameters is following:

Parameter Meaning Type Range
intensity intensity float 0...1
sharpness sharpness float 0...20
grainSize grain size float 1...8
intensityX0 intensityX0 float
intensityX1 intensityX1 float
monochromatic monochromatic bool

Syntax: hndlFilmGrain ppEffectAdjust [ intensity, sharpness, grainSize, intensityX0, intensityX1, monochromatic ];

Defaults: hndlFilmGrain ppEffectAdjust [ 0.1, 1.5, 1.7, 0.2, 1.0, true ];

Copypaste example: 0 = ["FilmGrain", 2000, [ 1, 0.15, 7, 0.2, 1.0, true ]] spawn { params ["_name", "_priority", "_effect", "_handle"]; while { _handle = ppEffectCreate [_name, _priority]; _handle < 0 } do { _priority = _priority + 1; }; _handle ppEffectEnable true; _handle ppEffectAdjust _effect; _handle ppEffectCommit 5; waitUntil {ppEffectCommitted _handle}; uiSleep 3; comment "admire effect for a sec"; _handle ppEffectEnable false; ppEffectDestroy _handle; };

ColorInversion编辑

Title: "ColorInversion"; Base Priority: 2500

Parameter Meaning Type Range
Red Inversion of R channel float 0...2
Green Inversion of G channel float 0...2
Blue Inversion of B channel float 0...2

Syntax: hndlClrInversion ppEffectAdjust [Red, Green, Blue];

Defaults: hndlClrInversion ppEffectAdjust [0, 0, 0];

Copypaste example: 0 = ["ColorInversion", 2500, [0.5, 0.5, 0.5]] spawn { params ["_name", "_priority", "_effect", "_handle"]; while { _handle = ppEffectCreate [_name, _priority]; _handle < 0 } do { _priority = _priority + 1; }; _handle ppEffectEnable true; _handle ppEffectAdjust _effect; _handle ppEffectCommit 5; waitUntil {ppEffectCommitted _handle}; uiSleep 3; comment "admire effect for a sec"; _handle ppEffectEnable false; ppEffectDestroy _handle; };


See also: ppEffectAdjust, ppEffectCommit, ppEffectCommitted, ppEffectCreate, ppEffectDestroy, ppEffectEnable, ppEffectEnabled, ppEffectForceInNVG

更多维基

随机维基