Fandom

武装突袭 Wiki

Vehicle Damage

简体 | 繁體

4,827个页面创建
于此维基上
添加新页面
评论0 分享

您使用了广告屏蔽软件!


Wikia通过广告运营为用户提供免费的服务。我们对用户通过嵌入广告屏蔽软件访问网站进行了使用调整。

如果您使用了广告屏蔽软件,将无法使用我们的服务。请您移除广告屏蔽软件,以确保页面正常加载。


Adding Damage to your Vehicle Addon - Tutorial编辑

Draft Revision 0 - June 18, 2008

I won't pretended to be a definitive expert on this, but it seems no one else has compiled known bits all together.

What I will address in this tut;

  • Adding damage textures over a model once fully damaged
  • Animating sections of the model upon damage
  • Basic windscreen damage

What I won't address (until further knowledge);

  • Level 2 or intermediate damage textures
  • Window armour

Scope

  • Most if not all ArmA vehicles
  • You can edit the P3D file (and have O2 installed)


ADDING DAMAGE TEXTURES编辑

Step 1 - Face selection

  • In all your Resolution and XXXX View LODs ensure the WHOLE vehicle is highlighted (ALT-A) in O2 and the whole vehicle is named "zbytek"
  • If at any time you add to the model, ensure you Redefine "zbytek" to be the whole model again.

Step 2 - Material definitions

  • In every Resolution and XXXX View LOD ensure every texture you plan to make damaged has a MATERIAL definition
  • This also typically means each texture will also have a "_NOHQ.paa" and a "_SMDI.paa" version of the textures.

http://members.iinet.net.au/~nrspence2/ArmA/DamageTut/DT_1.jpg

  1. CTRL-Click on a Texture in the texture list
  2. From the menu select FACES -> FACE PROPERTIES
  3. Material definition appears in the lower right box
  • If the texture does not have this, you probably have no choice except to create a Material definition.


Step 3 - Destruct RVMATs

  • Once all textures have been checked / fixed you don't need to re-enter O2
  • For each texture with a Materials definition you need to know 2 things
  1. the filename and location of the NOHQ file
  2. the dimensions of the texture (eg 1024x512 or 256x256 etc)
  • Now create a FILENAME _destruct.rvmat for each texture using a copy of below

texturefilename_destruct.rvmat ambient[]={1.0,1.0,1.0,1.0}; diffuse[]={1.0,1.0,1.0,1.0}; forcedDiffuse[]={0.0,0.0,0.0,0.0}; emmisive[]={0.0,0.0,0.0,1.0}; specular[]={1.0,1.0,1.0,0.0}; specularPower=40.0; PixelShaderID="NormalMapMacroASSpecularDIMap"; VertexShaderID="NormalMapAS"; class Stage1 { texture="XXXSIG_general\effects\bottom_nohq.pacXXX"; uvSource="tex"; class uvTransform { aside[]={1.0,0.0,0.0}; up[]={0.0,1.0,0.0}; dir[]={0.0,0.0,0.0}; pos[]={0.0,0.0,0.0}; }; }; class Stage2 { texture="ca\data\destruct\vehicle_destrXXX256_256XXX_mc.paa"; uvSource="tex"; class uvTransform { aside[]={1.0,0.0,0.0}; up[]={0.0,1.0,0.0}; dir[]={0.2,0.0,0.0}; pos[]={0.2,0.0,0.0}; }; }; class Stage3 { texture="#(argb,8,8,3)color(1,1,1,1)"; uvSource="tex"; class uvTransform { aside[]={1.0,0.0,0.0}; up[]={0.0,1.0,0.0}; dir[]={0.0,0.0,0.0}; pos[]={0.0,0.0,0.0}; }; }; class Stage4 { texture="ca\data\destruct\vehicle_destrXXX256_256XXX_smdi.paa"; uvSource="tex"; class uvTransform { aside[]={1.0,0.0,0.0}; up[]={0.0,1.0,0.0}; dir[]={0.0,0.0,0.0}; pos[]={0.0,0.0,0.0}; }; };

  • These new files will have to be in the same directory location as you other .rvmat files
  • An example; If the main texture is bottom.pac and the rvmat is bottom.rvmat, the new file should be bottom_destruct.rvmat

There are 3 XXX Highlighted section in the above code you need to customize;

  • The FIRST section needs to point to your relevant _NOHQ texture
  • The SECOND and THIRD section should (not need) point to the default BIS texture of the same size as you texture
  • i.e. 1024_512 or 2048_1024
  • Most dimensions are covered by BIS from 2048x2048 through 256x256
  • Be sure to remove the XXX

Once finished you should have 5 files for each texture;

  • 1 main, 1 Normal Map (NOHQ), 1 Spectral Map (SMDI), 1 standard Material RVMAT and 1 Destroyed RVMAT

http://members.iinet.net.au/~nrspence2/ArmA/DamageTut/DT_2.jpg


Step 4 - CONFIG.CPP

  • Not proven but likely in each CfgSkeletons you will need to inherit a BIS class, in this example "Car"


CfgSkeletons partial class CfgSkeletons { class car; class MyAddonSkeleton: car { isDiscrete=1; skeletonInherit = "";

  • Again not proven but likely in each CfgModels you will need to inherit a BIS class, in this example "Car" again

CfgModels partial class CfgModels { class default{}; class Vehicle: Default { sectionsInherit=""; sections[] = {xxxx, xxxxx, xxxxxx, xxxxxx}; };

class Car: Vehicle { sectionsInherit="Vehicle"; sections[]= {xxxxxx, xxxxx, xxxxx, xxxxx, xxxxxx}; }; class MyAddonP3D: Car { skeletonName = "MyAddonSkeleton"; sectionsInherit="car";

  • Under CfgVehicles you then need to make a class Damage definition.
  • Below is an example

CfgVehicles partial class CfgVehicles { class Landrover; // extended class class MyAddon: Landrover { ............ ............ class Damage { tex[] = {}; mat[] = { "SIG_general\effects\bottom.rvmat", "SIG_general\effects\bottom.rvmat", "SIG_general\effects\bottom_destruct.rvmat", ............. ............ ............. "SIG_general\effects\LastDamageTexture.rvmat", "SIG_general\effects\LastDamageTexture.rvmat", "SIG_general\effects\LastDamageTexture_destruct.rvmat" }; }; ............ ............

  • The definitions are done in groups of 3 definitions;
    • First definition is NO damage
    • Second definition is HALF damage
    • Third definition is FULL damage
  • In the example above there is no HALF damage definition, it simply copies the NO damage definition.
  • For half damage you could experiement with another "half" RVMAT file and reference it in the second line.

With above complete for ever texture, this should now mean that you will see damage on your vehicle.

EXCLUSION - GLASS - PENDING being written编辑

  • Glass needs extra work, I will describe one way to get "broken glass" effect


NEXT - Animation - PENDING being written编辑

  • Covers HIDING sections of the vehicle once damaged (i.e. unnessisary model detail)
  • Also covers animating things like LANDCONTACTs etc


..... if I didn't forget something;

Example Finished Product

http://members.iinet.net.au/~nrspence2/ArmA/DamageTut/DT_6.jpg


Final Note: No doubt some of above is simply a "Parrot copy" and can in reality be changed and IT WILL STILL WORK, but without spending hours upon hours finding out what bits can be changed or altered slightly I have simple written down what works for me. If you find working variations PLEASE let us all know. Gnat 17:22, 19 June 2008 (CEST)

更多维基

随机维基